解清阁，钢铁共性技术协同创新中心副研究员。 2014年在比利时鲁汶大学获得工学博士学位。2016-2017年在美国橡树岭国家实验室从事博士后课题研究。2018年在新加坡科技局高性能计算中心从事Scientist II, stage III职位。
目前主要从事金属材料的微观组织和力学服役关联行为的仿真（数字孪生）和应用研究，包括高强金属残余应力控制技术，金属撞击行为的模拟，增材制造介观组织数字孪生等。和德国，比利时，芬兰，爱尔兰，匈牙利，美国，新加坡等同事有众多学术合作。
邮箱：qingge.xie@ustb.edu.cn
【在研科研项目】
1．国家自然科学基金，金属材料‘分层’多尺度弹塑性各向异性模型及原位实验验证，（No.51571025）， 2016-2019年。
2．基本科研业务费，金属材料微观组织不均匀和宏观力学行为的关联机理研究， 2018-2021年．
【代表性学术论文】
1. Q. Xie, Z. Yan, D. Yu, K. An, X. Yan, S. Yin, B. Gillham, X. Wu, P. Yang, Z. Zhao, Y. Wang, Crystallographic orientation and spatially resolved damage for polycrystalline deformation of a high manganese steel, Acta Materialia 226(2022) 117628.
2. Q. Xie, Z. Pei, J. Liang, D. Yu, Z. Zhao, P. Yang, R. Li, M. Eisenbach, K. An, Corrigendum to “Transition from the twinning induced plasticity to the g-e transformation induced plasticity in a high manganese steel” [Acta Materialia 161(2018)273-284], Acta Materialia 218(2021) 117211.
3. Q.Xie, J. Lian, J. Sidor, F. Sun, X. Yan, C. Chen, T. Liu, W. Chen, P. Yang, K. An, Y. Wang, Crystallographic orientation and spatially resolved damage in a dispersion hardened Al alloy, Acta Materialia 193(2020) 138-150.
4. Q. Xie, Z.Pei, J.Liang, D.Yu, Z.Zhao, P.Yang, R.Li, M.Eisenbach, K.An, Transition from the twinning induced plasticity to the g-e phase transformation induced plasticity in a high manganese steel, Acta Materialia 161(2018) 273-284.
5. Xie, Q., Van Bael, A., Sidor, J., Moerman, J., Van Houtte, P. A new cluster type model for the simulation of textures of polycrystalline metals. Acta Materialia, 69, 175-186(2014).
6. Q. Xie, Y. Chen, P. Yang, Y. D. Wang, K. An, In-situ neutron diffraction and theoretical investigation on the tension-compression load reverse effect in the TWIP steel, Scripta materialia, 150, 168-172(2018).
7. Q.Xie, J.Liang, A.D. Stoica, R. Li, P. Yang, Z. Zhao, J. Wang, H. Lan, R. Li, K. An, In-situ neutron diffraction study on the tension-compression fatigue behavior of a twinning induced plasticity steel, Scripta Materialia, 137, 83-87(2017).
8. R. Li, Q. Xie (co-first author), Y. D. Wang, W. Liu, M.Wang, G. Wu, X. Li, M. Zhang, Z. Lu, C. Geng, T. Zhu, Unraveling submicron mechanical heterogeneity by three-dimensional X-ray micro-diffraction. Proceedings of the National Academy of Sciences (PNAS) 115(2018) 483-388.
9. Q. Xie, G. Song, S. Gorti, Alexandru Stoica, B. Radhakrishnan, Jean Bilheux, M. M. Kirka, R. Dehoff, Hassina Z Bilheux, Ke An, Applying neutron transmission physics and 3D statistical full-field model to understand 2D Bragg-edge imaging, Journal of Applied Physics 123, 074901 (2018).
10. Q. Xie, J. Lian, F. Sun, B. Gan, Y.D.Wang, The lattice strain ratio in charactering the grain-to-grain interaction effect and its specific insight on the plastic deformation of polycrystalline materials in a tensile test, Journal of strain analysis for engineering design, 53,353-363(2018).
11. Q. Xie, A. Van Bael, Y. An, J.Lian, J. J.Sidor, Effects of the isotropic and anisotropic hardening within each grain on the evolution of the flow stress, the r-value and the deformation texture of tensile tests for AA6016 sheet, Materials Science and Engineering A 172, 154-164(2018).
12. Q. Xie, S. Gorti, J.J. Sidor, Y.G.An, Y.D.Wang, J. Lian, H.Lan, K.An, grain orientation dependence of the residual lattice strain in a cold rolled interstitial-free steel, Steel research international 89(2018) 1700408 (cover report).
13. Q.Xie, R.Li, Y.D.Wang, R.Su, J.Lian, Y.Ren, W.Zhang, X.Zhou, Y.Wang, The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy, Materials science and engineering A, 714 140-145(2018).
14. Q.Xie, P. Eyckens, H. Vegter, J. Moerman, A. Van Bael, P. Van Houtte, Polycrystal plasticity models based on crystallographic and morphologic texture: Evaluation of predictions of plastic anisotropy and deformation texture. Materials Science and Engineering A, 581, 66-72 (2013).
15. Yang, M. X., Yuan, F. P., Xie, Q. G., Wang, Y. D., Ma, E., and Wu, X. L. Strain hardening in Fe-16Mn-10Al-0.86C-5Ni high specific strength steel, Acta Materialia, 2016(109) 213-222.
16. Sidor, J., Petrov, R., Xie, Q., Van Houtte, P. and Kestens, L., Evaluation of crystallographic changes and plastic strain ratio in Al alloys, Materials Science and Technology, 2017(33) 667-677.
17. Rohit Voothaluru, Vikram Beedekar, Qingge Xie, Alexandru D. Stoica, R.Scott Hyde, Ke An, In-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in bearing steels, Materials science and engineering A 711(2018) 579-587.
18. T. Liu, Z. Wu, A. D. Stoica, Q. Xie, W. Wei, H. Bei, Y. Gao, K. An, Twinning-mediated Work Hardening and Texture Evolution in CrCoFeMnNi High Entropy Alloys at Cryogenic Temperature, Materials and design, 2017(131) 419-427.
19. Thijs, L., Montero Sistiaga, M., Wauthlé, R., Xie, Q., Kruth, J., Van Humbeeck, J. (2013). Strong morphological and crystallographic texture and resulting yield strength anisotropy in Selective Laser Melted tantalum. Acta Materialia, 61 (12), 4657-4668.
20. P. Yang, Q. Xie, L. Meng, H. Ding, Z. Tang. Dependence of deformation twinning on grain orientation in a high manganese steel. Scripta Materialia, 2006, 55: 629–631.
21. L.Meng, P.Yang, Q.Xie, H. Ding, Z. Tang. Dependence of deformation twinning on grain orientation in compressed high manganese steels. Scripta Materialia, 2007, 56:931–934.
22. R.Li, Y. Wang, W.Liu, C.Geng, Q.Xie, D.Brown, K.An, Multiscale mechanical fatigue damage of stainless steel investigated by neutron diffraction and X-ray microdiffraction, Acta Materialia 165(2019) 336-345.
23. S.Yin, M. Hassani, Q. Xie, R. Lupoi, Unravelling the deposition mechanism of brittle particles in metal matrix composites fabricated via cold spray additive manufacturing, Scripta Materialia, 194(2021) 113614.